Tinycontrol GSM Control SMS GPRS Module Server Port Remote Relay Tinycontrol GSM Control SMS GPRS Module Server Port Remote Rela

0400-GSMC-V3

New

Tinycontrol GSM Control SMS GPRS Module Server Port Remote Relay

More details

4 Items

£ 59.99

Data sheet

MPN GSMKON-040
Manufacturer warranty 1 year
Brand Tinycontrol
Model GSM Controler V3
Analog Inputs 4 Analog Inputs
Digital Inputs 4 Logical Inputs
1Wire Inputs Up to 8 - DS18B20
Transistor Outputs 1 up to 1A
Mounting DIN Rail

More info

GSM v3 controller allow monitor by gsm network different phisical parameters and control remotely on/off 5 outputs. Control is done through SMS messages and monitoring can be run by SMS or gprs data transmission to internet server. Http datas can be sent for example to www.thingspeak.com server, where are not only collected but can be read as dynamically presented graphs. Further GSM controller functionality is action automating. After simple set up when some input parameters reach the set size, outputs actions will be performed, eg send a message or switching outputs.

Examples

  • ISP:
  • the power supply control - notification of his disappearance
  • voltage control backup battery
  • temperature control or opening control server cabinet and remote reaction
  • Control on / off lighting or other devices remotely or by program
  • a simple alarm system with notification
  • Home Automation:
  • Automatic control of the radiator and notification of status or temperature
  • Control ON / OFF lighting or other devices remotely or by part program
  • a simple alarm system with notification
  • Fittings:
  • Temperature control and possible notification, switching valve, etc.
  • Monitoring of voltage and possibly automatic switching to source spare
  • Monitoring for Environment and Agriculture:
  • Collection of environmental data with the extensive grounds
  • The meteorological monitoring

Restarter, Monitor, Watchdog, Controller
  • Basic Possibilitties:
  • Management by SMS or USB (after connecting to computer)
  • Monitoring by gprs transmission to http server, by SMS received on user phone or by USB
  • Upgrade new firmware by USB port
  • Monitoring logic states, for example move sensors, position detectors
  • Measurment of voltage, temperature, humidity i and many more by analog voltage inputs
  • Pulse counting on INP4D
  • Transistor output (up to 1A), possibility to connect additinal board with 4 realys or PoE injector with power switching
  • SMS or http notification about logical inputs
  • Supported sensors: PT1000, DS18B20, DHT22 (temperature and humidity)
  • Up to 99 phone numbers in memory allowing to control! - solution for gate opener in restricted areas
  • Command authentication by password
  • Remote power supply measurement

The default authorization code is "1234"

  • Technical specification:
  • GSM module bands 900 / 1800 / 1900 MHz
  • SIM interface 1.8 and 3V
  • USB interface
  • Virtual COM port (115200, 8 bits, 1 bit stop, no parity, no parity and flow control)
  • Other interfaces 1-Wire (RJ11), SPI, I2C, UART
  • Transistor out 1 x 1A / turn on supply voltage
  • OC outs 4x outs open collector type, transistor BC847B (45V-100mA)
  • Logical inputs 4 pcs - max 20V
  • Analog inputs 3 pcs, 2x voltage 0+3.6V, lx voltage 0+36V
  • Temperature meas. lx PT1000, 1 wire sensors x8 DS18B20
  • Antenna attached
  • Input power supply 6+28V DC, socket size 5.5 mm
  • Power consumption 0.3W without GSM transmission
  • Operational temp. from -20 to +70 C
  • Board size 68 x 61 mm
  • board weight 57g
  • Input/Outputs:
  • 1 TRANSISTOR OUTPUT: to power other devices, it gets voltage from the power supply, max 28V - lA
  • 4 OUTPUT open collector type (transistor BC847B): for switching relays, PoE ports, or other devices
  • 4 LOGICAL INPUTS: to monitor other devices, such as power supply units, the reed switches. Cooperation with the outputs of OC, NO, NC
  • 4 ANALOG INPUTS, 12-bit converter INP 1A: voltage measurement to 35V INP2: voltage measurement to 3.3V INP3: voltage measurement to 3.3V
  • PT1000: for connecting a temperature sensor PT1000
  • SENSOR INTERFACE for DHT22: humidity measurement
  • BUS 1-Wire (RJ11 connector): for connecting the sensor DS18820, max 8 pieces
  • USB BUS: to configure the module, a preview of sensors and software updates
  • I2C BUS: for connecting additional sensors, expansion platelets, not supported in version 1.0.
  • UART INTERFACE: for connecting additional sensors, expansion platelets, not supported in version 1.0.
  • SPI INTERFACE: for connecting additional sensors, expansion platelets, not supported in version 1.0
  • Package Contents:
  • 1X Tinycontrol - GSM Controller With Antenna + Green Case - No Power Supply, NO external sensors or relays - Acessoriess are available in our shop